Direct-drive screw air compressor ZLS30, 22 kW

Direct-drive screw air compressor ZLS30, 22 kW is a model of the Direct-Drive Screw Air Compressor, 7.5–250 kW series. Key data: power 22/30 kW/HP, capacity at 0.7 MPa 3.8 m³/min, capacity at 0.8 MPa 3.4 m³/min, capacity at 1.0 MPa 3.1 m³/min, oil 11 L, noise 72±2 dB(A).

ZLS30 specifications

All models: power supply 220/380/415 V, 50/60 Hz; discharge air temperature not above ambient +10 °C with air cooling and not above 40 °C with water cooling.

Series features

• direct drive of the air end without belts;
• star-delta start, simple control circuit;
• pressure of 0.7, 0.8 or 1.0 MPa;

Applications

• pneumatic systems of injection molding machines: clamping, ejectors, robot part removal;
• preform blowing and forming on blow molding machines (up to 1 MPa);
• air cooling and bubble inflation on film extrusion lines;

Other models of the series

• Direct-drive screw air compressor ZLS20, 15 kW
• Direct-drive screw air compressor ZLS40, 30 kW
• Direct-drive screw air compressor ZLS15, 11 kW

All models and the comparison table are on the series page Direct-Drive Screw Air Compressor, 7.5–250 kW.

Questions and answers

How does ZLS30 differ from the neighbouring models?

ZLS30: power 22/30 kW/HP, capacity at 0.7 MPa 3.8 m³/min. For comparison: ZLS20: power 15/20 kW/HP, capacity at 0.7 MPa 2.5 m³/min; ZLS40: power 30/40 kW/HP, capacity at 0.7 MPa 5.2 m³/min. Selection by air demand and pressure is on the series page.

Price on request. Send an enquiry and we will confirm the configuration of this model and prepare a quotation.